CASE STUDIES
 
 
Featured Case Study

Vehicle:
1918 BUICK 6.6 SUPERCHARGED HOT ROD

Product Supplied:
ALUMINIUM WATER RADIATOR

This supercharged 6.6 litre Buick needed a radiator upgrade but the owner Simon Glenn wanted to keep as much of the original shape as possible. This radiator was built to his sketch and we were all very proud of the…

View Case Study

Case Studies

Buick Hot Rod

This supercharged 6.6 litre Buick needed a radiator upgrade but the owner Simon Glenn wanted to keep as much of the original shape as possible. This radiator was built to his sketch and we were all very proud of the…

View Case Study

High Performance Off Road Buggy

These purpose built buggies are used for racing and corporate events. They are subjected to real extreme conditions and have to be able to take the knocks and abuse thrown at them. We supplied a prototype open finned plate and…

View Case Study

MG Leicester

As the customer was renovating the vehicle as part of a long term project, they required an aluminium water radiator that replaced the original copper and brass combi cooler. The customer wanted to increase the water cooling in the replacement…

View Case Study

Sparton Formula Ford

This Sparton Formula Ford has been converted for oval racing in the GP Midget Formula. New Owner Dave Dollin chose GDM Motorsport for help with the roll cage to bring it up to the regulations. We also supplied a new…

View Case Study

Reiley 8 Hot Rod

The proprietor of Derek’s Mini Centre is building a huge old Reiley 8 Hotrod with some very modern styling and performance techniques. It is sure to be a show stopper once completed. GDM Motorsport have so far provided this monster…

View Case Study

Panther Lima

The existing cooler within the vehicle was beyond repair, therefore a replacement water radiator was required. As a result an aluminium water radiator was fabricated to pattern. Extra fittings were included for a thermostat as specified by the customer. GDM Motorsport…

View Case Study

Long Range Mini

This fuel tank was built for a customer of Derek’s Mini Centre of Willenhall. They are completely rebuilding a classic mini which is used to tour Europe. The customer wanted a larger tank to allow him to go further off…

View Case Study

Street Eliminator Ford Pop

In this instance the customer utilised the vehicle for both racing and show purposes. The existing cooler was leaking so a full repair was made. The customer also required a separate radiator when showing the vehicle so a replacement one…

View Case Study

Cobra Dax

This fuel tank is a one off for a DAX Cobra. The cars owner submitted the drawing. We recommended fitting bigger breathers to the tank to allow the vented air out faster when filling with fuel. Other than that it…

View Case Study

Cobra Hawk

The customer required the aluminium water radiator for aesthetic purposes. In this particular instance fans were required to be mounted on the cooler in question. GDM Motorsport are able to source fans from reputable suppliers or include brackets if own…

View Case Study

Dessert Rally Raid Citroen DS23

This radiator was built for a European customer for a Historic Dessert Rally Raid Citroen DS23. The super high ambient temperatures were causing issues. The customer specified the massive fans to achieve the biggest possible air flow through the radiator…

View Case Study

Humble MGR

The aluminium fabricated fuel tank was a weight saving solution located in the spare wheel compartment of the vehicle. It was designed and manufactured to allow for better weight distribution. With the tank being so small the fuel pick up…

View Case Study

Honda CRX

This stunning little car is owned by Richard Dorrell from the Midlands. His detailed blog on the CRX owners site (spilla23) gives a real insight into the work and investment made. Richard has sought parts from all over the world…

View Case Study

Hot Rod Morris Minor

The beast now houses a super charged Chevy small block engine with over 5 times the original cubic capacity of the car in standard form! As you can imagine things get rather hot under the bonnet and there is not…

View Case Study
Featured Case Study